Structure

Structure
Load-bearing structure composed of galvanised steel vertical uprights with thickness of 1.2 mm, sheared, cold-profiled, channelled and positioned with modular centre-tocentre. Fitted at the base with adjustable feet and holes every 32 mm to fit furniture industry components.
The uprights are inserted at ceiling and floor levels into the galvanised steel perimeter profile which has a thickness of 1 mm and is pre-painted black.
The uprights are secured at the centre-to-centre distance, standard 500-600-1000-1200 module, by drop-forged galvanised steel cross-members with a thickness of 1.2 mm and holes for cables.
The uprights and cross-members are fitted with an adhesive seal in the area in which they are secured to the panel.

The colours

The colours
The colours used for the steel dividing walls are the same as for the accessory-equipped walls to ensure a uniform finish:

• Grey
• White
• Ivory

The colours used for the wood dividing walls, the add-on walls and the equipped walls are as follows: 

• Grey
• White
• Ivory
• Laminated maple
• Veneered cherry wood
• Laminated dark beech
• Laminated light walnut
• Veneered Italian walnut
• Laminated Victoria walnut

Aluminium door frames and pane framesavailable in:

• Anthracite grey

Ceiling level and floor level profiles available in:

•   Black
  

The Wals

The Walls
Mobile internal wall -  suitable for equipment, modular, with thickness of 114 mm and composed of two skins, with inspectable cavity for vertical and horizontal insertion of technical systems.

Panels

Panels
• Blind panels
made of 18 mm fire-retardant sinter with good resistance to light and abrasion, with fine wax refection-proof finish, edged with impact-proof material and available in grey, white or ivory. The panels are secured to the structure using steel bayonet clamps and can be removed individually simply by lifting.
The dividing wall modules can be fitted together with “blind” curtain walls, or single- or double-pane panels.
• Single-pane frame
Made of extruded aluminium profiles with anthracite grey thermosetting powder coating.
Visarm 6/7 mm pane is located in the middle of the module.
• Framed twin-pane frame
Made of extruded aluminium profiles with anthracite grey thermosetting powder coating. The Visarm 6/7 mm pane is inserted in the frame, sealed with a rubber seal and fitted with an 11 mm visible aluminium edge.
• Screen-printed edge-glued twin-pane panels
These are made using a concealed aluminium profile thus ensuring that the panes are on the same plane as the blind parts and without visible profiles. The Visarm 6/7 mm panes are secured to the frame using very resistant two-sided adhesive. Venetian blinds can be inserted between the panes.
A layer of mineral wool (optional) can be inserted in the cavity between the blind panels for better noise insulation.

Doors

Doors
• Counter-frames made of extruded aluminium profile coated with anthracite grey thermosetting powder.
Hollow-core door panel coated on both sides with anthracite grey plastic laminate sheets. Door perimeter finished with plug-in painted aluminium
profiles and complete with lock and Hoppe handle.

Angles

Angles
The 90° angle and variable angle are made of aluminium profile coated with dark grey thermosetting powder and are an integral part of the structure.

Accessories

Accessories
For particular installation requirements, in offices with public access (post offices, banks, reception counters), or to complete the walls from an esthetic point of view, a series of accessories is available, which integrate perfectly with the modularity of the wall itself.
The glass modules with slits for passing papers or speak-through holes are inserted in the glass panel frames and are made of hardened glass.

The cabinets, hooked directly into the upright slots, are particularly sturdy and have a high carrying capacity.

Safety, privacy, comfort, well-being;
MODULART has a solution for all requirements, harmonizing with and  adapting to the environment in which it is installed.

Add-on containers for dividing wall

Add-on containers for dividing wall
The MODULART “STEEL” and “TR” system walls can be equipped with container modules or cabinets which help to make some of the work spaces  particularly functional.
The slots in the wall uprights allow the insertion of special couplings, thanks to which the wall can be equipped with cabinets which make use of the wall as their back panel.
These couplings, inserted in the central slots of the uprights, allow the wall to be equipped at any time and the various components to be adjusted and moved around as required. Assembly is easy and quick and does not require any particular installation skill.